Rdl Gold D-Tps6a Passive 1-Pair Sender Twisted Pair Format-A Stereo Phono Jack Inputs Size 1
$103.02
Product Description
Radio Design Labs' -TPS6A is a single-pair audio sending module compatible with RDL® Format-A twisted pair products. The front panel features two gold plated phono jacks intended for stereo consumer line level audio sources, along with a studio-quality transformer that provides isolation between the audio source and the RJ45 TP CABLE.The -TPS6A is a single-pair sender, feeding the input signal to the cable pair set on the rear-panel switch during installation. This module drives only one cable pair, therefore a TP CABLE RJ45 jack is provided to accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained to a TP CABLE jack, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The -TPS6A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C.The -TPS6A is a passive module that does not require power to operate. If power is present on a cable connected to a TP CABLE jack, that power is passed through to the modules connected to the other TP CABLE jack.Radio Design Labs D-TPS6A Features:Stereo Audio Input Combined to Mono OutputInput on Dual RCA JacksSwitch Selects which RJ45 Pair (A, B or C) is FedSignal and Power Pair Pass-Through between TP CABLE RJ45 JacksPassive Circuitry Does Not Require PowerGalvanic Isolation through a Studio-Quality TransformerDaisy-Chain with Single-Pair or Two-Pair Format-A SendersRadio Design Labs D-TPS6A Specifications:Input: 2 RCA jacks, unbalanced stereo combined to monoInput Level: -10 dBV, +22 dBu maxFormat-A Signal Pair Used: Switch-selectable A, B, or C (rear-panel switch)Format-A Input: RJ45 TP CABLEOuput: RJ45 TP CABLE, RDL TP Format-AFrequency Response: 20 Hz to 20 kHz (±0.5 dB)THD:< 0.1% (50 Hz to 20 kHz);< 0.001% (1 kHz typ)Power Requirement: PassiveDimensions: 1.6” (4.06 cm) W; 4.11” (10.45 cm) H; 1.89” (4.8 cm) DPackage Type: Cardboard BoxPackage Dimensions: 3.625 x 4.625 x 2.125 in.Shipping Weight: 0.515 lbs.WEEE weight: 0.365 lbs.Tariff code: 8517.18.0000 RDL D-TPS6A Passive 1-Pair Sender Twisted Pair Format-A Stereo Phono Jack Inputs.
Rdl Gold D-Tps6a Passive 1-Pair Sender Twisted Pair Format-A Stereo Phono Jack Inputs Size 1
Radio Design Labs' -TPS6A is a single-pair audio sending module compatible with RDL® Format-A twisted pair products. The front panel features two gold plated phono jacks intended for stereo consumer line level audio sources, along with a studio-quality transformer that provides isolation between the audio source and the RJ45 TP CABLE.The -TPS6A is a single-pair sender, feeding the input signal to the cable pair set on the rear-panel switch during installation. This module drives only one cable pair, therefore a TP CABLE RJ45 jack is provided to accept signals and power from other mic-level or line-level Format-A senders. Two other single-pair senders may be chained to a TP CABLE jack, or a single two-pair sender may be connected. If three single-pair senders are connected together, each sender must feed a different pair: A, B or C. The -TPS6A must be set to feed pair A if it is connected together with an RDL two-pair sender that feeds stereo audio on pairs B and C.The -TPS6A is a passive module that does not require power to operate. If power is present on a cable connected to a TP CABLE jack, that power is passed through to the modules connected to the other TP CABLE jack.Radio Design Labs D-TPS6A Features:Stereo Audio Input Combined to Mono OutputInput on Dual RCA JacksSwitch Selects which RJ45 Pair (A, B or C) is FedSignal and Power Pair Pass-Through between TP CABLE RJ45 JacksPassive Circuitry Does Not Require PowerGalvanic Isolation through a Studio-Quality TransformerDaisy-Chain with Single-Pair or Two-Pair Format-A SendersRadio Design Labs D-TPS6A Specifications:Input: 2 RCA jacks, unbalanced stereo combined to monoInput Level: -10 dBV, +22 dBu maxFormat-A Signal Pair Used: Switch-selectable A, B, or C (rear-panel switch)Format-A Input: RJ45 TP CABLEOuput: RJ45 TP CABLE, RDL TP Format-AFrequency Response: 20 Hz to 20 kHz (±0.5 dB)THD:< 0.1% (50 Hz to 20 kHz);< 0.001% (1 kHz typ)Power Requirement: PassiveDimensions: 1.6” (4.06 cm) W; 4.11” (10.45 cm) H; 1.89” (4.8 cm) DPackage Type: Cardboard BoxPackage Dimensions: 3.625 x 4.625 x 2.125 in.Shipping Weight: 0.515 lbs.WEEE weight: 0.365 lbs.Tariff code: 8517.18.0000 RDL D-TPS6A Passive 1-Pair Sender Twisted Pair Format-A Stereo Phono Jack Inputs.
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.